A Bibliometric Analysis of Maritime HR Competitiveness Research

Nirmeen Elsayed, Mahmoud Hamza, Muhammad A. Arfeen, Ahmed Omar, Ahemd Atef

Abstract


This paper aims to explore and delineate the prevailing scientific trends within the domain of "Human Resources Competitiveness in the Maritime Industry." To assemble relevant information, an extensive examination of global literature on the subject was conducted, utilizing databases such as Scopus and Web of Science. In this paper, the R language was applied with the bibliometric package to execute a meticulous bibliometric analysis. Visualization techniques were applied to provide researchers with a clearer overview, facilitating an enhanced understanding of specific subject areas within the research. This investigation furnishes valuable insights into the progression of research on "Human Resources Competitiveness in the Maritime Industry." It identifies significant contributors, including noteworthy authors, countries, and institutions, while also outlining the primary directions for future research. It is essential to acknowledge the limitations of this study: there might be an oversight in retrieving all relevant documents, given the focus on fully published papers in the English language. Moreover, the study recognizes the absence of similar existing research, which may signify a unique contribution. However, it is crucial to note that while no similar studies were found, the assertion of uniqueness would be more robustly supported by emphasizing specific aspects or methodologies that distinguish this study from others. We strived to present a comprehensive panorama of this research field, yet it is imperative to recognize the limitations in data collection, especially concerning potential language bias and the possibility of omitting non-English publications. Additionally, there is a need to provide insight into the management of data privacy and confidentiality within bibliometric analysis, an aspect that demands attention in studies involving diverse data sources. 

Keywords


HR Competitiveness, Maritime Industry, Bibliometric Analysis, Maritime Competitiveness.

Full Text:

PDF

References


UNCTAD, “Handbook Of Statistics,” United Nations Publication, 2023. [Online]. Available: https://unctadstat.unctad.org/

H. Jayawardane, I. J. Davies, J. R. Gamage, M. John, and W. K. Biswas, “Sustainability perspectives – a review of additive and subtractive manufacturing,” Sustainable Manufacturing and Service Economics, vol. 2, no. April, p. 100015, 2023, doi: 10.1016/j.smse.2023.100015.

T. S. Srivatsan and T. S. Sudarshan, Additive Manufacturing Innovations, Advances, and Applications, 1st ed. CRC Press, 2015. doi: https://doi.org/10.1201/b19360.

S. T. Zivanovic, M. D. Popovic, N. M. Vorkapic, M. D. Pjevic, and N. R. Slavkovic, “An overview of rapid prototyping technologies using subtractive, additive and formative processes,” FME Transactions, vol. 48, no. 1, pp. 246–253, 2020, doi: 10.5937/fmet2001246Z.

M. Srivastava, S. Rathee, S. Maheshwari, and T. K. Kundra, Additive Manufacturing Fundamentals and Advancements, 1st ed. CRC Press, 2020. doi: https://doi.org/10.1201/9781351049382.

V. J. Kharat et al., “Additive manufacturing (3D printing): A review of materials, methods, applications and challenges,” Mater Today Proc, no. October, 2023, doi:

1016/j.matpr.2023.11.033.

J. Pelleg, Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties. Elsevier, 2020. doi: 10.1016/C2019-0-04180-5.

T. DebRoy et al., “Additive manufacturing of metallic components – Process, structure and properties,” Prog Mater Sci, vol. 92, pp. 112–224, 2018, doi: 10.1016/j.pmatsci.2017.10.001.

K. R. Balasubramanian and V. Senthilkumar, Additive Manufacturing Applications for Metals and Composites. in Advances in Civil and Industrial Engineering. IGI Global, 2020. doi: 10.4018/978-17998-4054-1.

O. Diegel, A. Nordin, and D. Motte, A Practical Guide to Design for Additive Manufacturing. in Springer Series in Advanced Manufacturing. Singapore: Springer Singapore, 2019. doi: 10.1007/978-981-138281-9.

L. Yang et al., Additive Manufacturing of Metals: The Technology, Materials, Design and Production.

in Springer Series in Advanced Manufacturing. Cham: Springer International Publishing, 2017. doi:

1007/978-3-319-55128-9.

T. Wohlers and T. Gornet, “History of Additive Manufacturing 2014,” Wohlers Report 2014 - 3D Printing and Additive Manufacturing State of the Industry, pp. 1–34, 2014.

M. E. Korkmaz, M. K. Gupta, G. Robak, K. Moj, G. M. Krolczyk, and M. Kuntoğlu, “Development of lattice structure with selective laser melting process: A state of the art on properties, future trends and challenges,” J Manuf Process, vol. 81, no. April, pp. 1040–1063, 2022, doi: 10.1016/j.jmapro.2022.07.051.

E. Toyserkani, D. Sarker, O. O. Ibhadode, F. Liravi, P. Russo, and K. Taherkhani, Metal Additive Manufacturing. Wiley, 2021. doi: 10.1002/9781119210801.

I. Gibson, D. Rosen, B. Stucker, and M. Khorasani, Additive Manufacturing Technologies, Third., vol. 89, no. 1. Cham: Springer International Publishing, 2021. doi: 10.1007/978-3-030-56127-7.

K. Kanishka and B. Acherjee, “Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges,” J Manuf Process, vol. 107, no. November, pp. 574–619, 2023, doi: 10.1016/j.jmapro.2023.10.024.

C. G. H. Turc, C. Carausu, and G. Belgiu, “Selection of subtractive manufacturing technology versus additive manufacturing technology for rapid prototyping of a polymeric product,” Materiale Plastice, vol. 57, no. 4, pp. 343–352, 2021, doi: 10.37358/MP.20.4.5434.

A. Paolini, S. Kollmannsberger, and E. Rank, “Additive manufacturing in construction: A review on processes, applications, and digital planning methods,” Addit Manuf, vol. 30, no. October, p. 100894, 2019, doi: 10.1016/j.addma.2019.100894.

M. B. A. Tamez and I. Taha, “A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration,” Addit Manuf, vol. 37, no. October 2020, p. 101748, 2021, doi: 10.1016/j.addma.2020.101748.

A. Jaisingh Sheoran and H. Kumar, “Fused Deposition modeling process parameters optimization and effect on mechanical properties and part quality: Review and reflection on present research,” Mater Today Proc, vol. 21, pp. 1659–1672, 2020, doi: 10.1016/j.matpr.2019.11.296.

A. D. Mazurchevici, D. Nedelcu, and R. Popa, “Additive manufacturing of composite materials by FDM technology: A review,” Indian Journal of Engineering and Materials Sciences, vol. 27, no. 02, pp. 179–192, 2020, doi: 10.56042/ijems.v27i2.45920.

W. Gao et al., “The status, challenges, and future of additive manufacturing in engineering,” CAD Computer Aided Design, vol. 69, pp. 65–89, 2015, doi: 10.1016/j.cad.2015.04.001.

M. Rafiee, R. D. Farahani, and D. Therriault, “Multi-Material 3D and 4D Printing: A Survey,” Advanced Science, vol. 7, no. 12, pp. 1–26, 2020, doi: 10.1002/advs.201902307.

T. Peng, K. Kellens, R. Tang, C. Chen, and G. Chen, “Sustainability of additive manufacturing: An overview on its energy demand and environmental impact,” Additive Manufacturing, vol. 21. Elsevier B.V., pp. 694–704, May 01, 2018. doi: 10.1016/j.addma.2018.04.022.

H. Jayawardane, I. J. Davies, J. R. Gamage, M. John, and W. K. Biswas, “Sustainability perspectives – a review of additive and subtractive manufacturing,” Sustainable Manufacturing and Service Economics, vol. 2, no. April, p. 100015, 2023, doi: 10.1016/j.smse.2023.100015.

S. Ford and M. Despeisse, “Additive manufacturing and sustainability: an exploratory study of the advantages and challenges,” J Clean Prod, vol. 137, pp. 1573–1587, Nov. 2016, doi:

1016/j.jclepro.2016.04.150.

K. Kanishka and B. Acherjee, “Revolutionizing manufacturing: A comprehensive overview of additive manufacturing processes, materials, developments, and challenges,” J Manuf Process, vol. 107, no. November, pp. 574–619, 2023, doi: 10.1016/j.jmapro.2023.10.024.

M. Javaid, A. Haleem, R. P. Singh, R. Suman, and S. Rab, “Role of additive manufacturing applications towards environmental sustainability,” Advanced Industrial and Engineering Polymer Research, vol. 4, no. 4. KeAi Communications Co., pp. 312–322, Oct. 01, 2021. doi: 10.1016/j.aiepr.2021.07.005.

T. M. Wischeropp, Advancement of Selective Laser Melting by Laser Beam Shaping. in Light Engineering für die Praxis. Berlin, Heidelberg: Springer Berlin Heidelberg, 2021. doi: 10.1007/978-3662-64585-7.

C. Y. Yap et al., “Review of selective laser melting: Materials and applications,” Appl Phys Rev, vol. 2, no. 4, 2015, doi: 10.1063/1.4935926.

H. Chen, Q. Wei, S. Wen, Z. Li, and Y. Shi, “Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method,” Int J Mach Tools Manuf, vol. 123, no. July, pp. 146–159, 2017, doi:

1016/j.ijmachtools.2017.08.004.

Y. Li et al., “Effects of process parameters on the microstructure and mechanical properties of AISI 1045 steel prepared by selective laser melting,” Mater Today Commun, vol. 37, no. October, p. 107287, 2023, doi: 10.1016/j.mtcomm.2023.107287.

C. Emmelmann, P. Sander, J. Kranz, and E. Wycisk, “Laser additive manufacturing and bionics:

Redefining lightweight design,” Phys Procedia, vol. 12, no. PART 1, pp. 364–368, 2011, doi: 10.1016/j.phpro.2011.03.046.

S. Sun, M. Brandt, and M. Easton, Laser Additive Manufacturing, vol. 69, no. 6. Elsevier, 2017. doi: 10.1016/C2014-0-03891-9.

L. Y. Chen, S. X. Liang, Y. Liu, and L. C. Zhang, “Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges,” Materials Science and Engineering R: Reports, vol. 146, no. September, p. 100648, 2021, doi: 10.1016/j.mser.2021.100648.

A. Großmann, J. Gosmann, and C. Mittelstedt, “Lightweight lattice structures in selective laser melting: Design, fabrication and mechanical properties,” Materials Science and Engineering: A, vol. 766, Oct. 2019, doi: 10.1016/j.msea.2019.138356.

H. Yin, W. Zhang, L. Zhu, F. Meng, J. Liu, and G. Wen, “Review on lattice structures for energy absorption properties,” Compos Struct, vol. 304, no. P1, p. 116397, 2023, doi: 10.1016/j.compstruct.2022.116397.

L.-Y. Chen, S.-X. Liang, Y. Liu, and L.-C. Zhang, “Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges,” Materials Science and Engineering: R: Reports, vol. 146, no. September, p. 100648, Oct. 2021, doi: 10.1016/j.mser.2021.100648.

S. A. Tyagi and M. M, “Additive manufacturing of titanium-based lattice structures for medical applications – A review,” Bioprinting, vol. 30, no. October 2022, p. e00267, 2023, doi: 10.1016/j.bprint.2023.e00267.

H. Yin, W. Zhang, L. Zhu, F. Meng, J. Liu, and G. Wen, “Review on lattice structures for energy absorption properties,” Compos Struct, vol. 304, no. P1, p. 116397, Jan. 2023, doi: 10.1016/j.compstruct.2022.116397.

J. Broughton and Y. K. Joshi, “Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams,” J Heat Transfer, vol. 142, no. 8, Aug. 2020, doi: 10.1115/1.4046972.

D. Li, X. Zhang, R. Qin, J. Xu, D. Yue, and B. Chen, “Influence of processing parameters on AlSi10Mg lattice structure during selective laser melting: Manufacturing defects, thermal behavior and compression properties,” Opt Laser Technol, vol. 161, p. 109182, 2023, doi: https://doi.org/10.1016/j.optlastec.2023.109182.

J. Lu and L. Zhuo, “Additive manufacturing of titanium alloys via selective laser melting: Fabrication, microstructure, post-processing, performance and prospect,” International Journal of Refractory Metals and Hard Materials, vol. 111. Elsevier Ltd, Feb. 01, 2023. doi: 10.1016/j.ijrmhm.2023.106110.

M. E. Korkmaz, M. K. Gupta, G. Robak, K. Moj, G. M. Krolczyk, and M. Kuntoğlu, “Development of lattice structure with selective laser melting process: A state of the art on properties, future trends and challenges,” J Manuf Process, vol. 81, no. April, pp. 1040–1063, 2022, doi:

1016/j.jmapro.2022.07.051.

M. A. El-Sayed, K. Essa, M. Ghazy, and H. Hassanin, “Design optimization of additively manufactured titanium lattice structures for biomedical implants,” International Journal of Advanced Manufacturing Technology, vol. 110, no. 9–10, pp. 2257–2268, 2020, doi: 10.1007/s00170-020-05982-8.

S. L. Sing, Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopaedic Biomaterial. in Springer Theses. Singapore: Springer Singapore, 2019. doi: 10.1007/978-981-13-2724-7.

D. Godec et al., “Applications of AM,” 2022, pp. 149–229. doi: 10.1007/978-3-031-05863-9_6.

A. A. Elhadad et al., “Applications and multidisciplinary perspective on 3D printing techniques:

Recent developments and future trends,” Materials Science and Engineering R: Reports, vol. 156. Elsevier Ltd, Dec. 01, 2023. doi: 10.1016/j.mser.2023.100760.

O. Bittredge et al., “Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder

Implants Using Laser Additive Manufacturing,” Materials, vol. 15, no. 9, p. 3095, Apr. 2022, doi:

3390/ma15093095.

D. Jia and F. Li, “Design of central symmetric lattice structure for ocean engineering based on fluidsolid-interaction,” Marine Structures, vol. 90, Jul. 2023, doi: 10.1016/j.marstruc.2023.103433.

B. (Metallurgist) Dutta, S. Babu, and B. Jared, Fundamentals of Laser Powder Bed Fusion of Metals. Elsevier, 2021. doi: 10.1016/C2020-0-01200-4.

E. Peterson, “Additive Manufacturing for Nautical Design: An Automated Approach to Marine Manufacturing,” 2022.

M. Ziółkowski and T. Dyl, “Possible applications of additive manufacturing technologies in shipbuilding: A review,” Machines, vol. 8, no. 4, pp. 1–34, 2020, doi: 10.3390/machines8040084.




DOI: https://dx.doi.org/10.21622/MARLOG.2024.13.1.87

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Nirmeen Elsayed, Mahmoud Hamza, Muhammad A. Arfeen, Ahmed Omar, Ahemd Atef

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

The International Maritime Transport and Logistics Journal (MARLOG)

E-ISSN: 2974-3141
P-ISSN: 2974-3133

Published by:

Academy Publishing Center (APC)

Arab Academy for Science, Technology and Maritime Transport (AASTMT)

Alexandria, Egypt