Complete dental rehabilitation utilizing removable partial dentures and monolithic zirconia crowns (case report)

Hagar Ibrahim, Marwan Aggag

Abstract


Bilateral edentulous areas are a common clinical presentation, and in most of those cases, implant repair may not be possible. As a result, the conventional metallic partial denture is still in use. As our awareness of appearance has grown in our daily life , esthetics became a crucial component of dentistry. consequently, patients ask for aesthetic restorations that also maintain functionality. Zirconia is a widely used material for both functional and aesthetic demands. It has been demonstrated that zirconia can endure occlusal and functional stresses without neglecting the aesthetic appearance that is expected of a tooth-colored restoration. which is why using it as surveyed crowns to support partial dentures is optimal.

 

Objectives: The goal of this case study is to demonstrate a method for restoring a partially edentulous patient through the use of a metallic partial denture held up by surveyed zirconia crowns using CAD-CAM technology.

 

Received: 14 July 2024

Accepted: 01 September 2024

Published: 19 September 2024


Keywords


zirconia, partial denture, surveyed crowns.

Full Text:

PDF

References


Zavanelli AC, Sônego MV, Zavanelli RA, Mazaro JVQ, Falcón-Antenucci RM. Perception and expectation. What do patients really want from the dental treatment? RGO - Revista Gaúcha de Odontologia. 2017;65(3).

Klaassen H, Dukes K, Marchini L. Patient satisfaction with dental treatment at a university dental clinic: A qualitative analysis. J Dent Educ. 2021;85(3).

Shi JY, Li X, Ni J, Zhu ZY. Clinical Evaluation and Patient Satisfaction of Single Zirconia-Based and High-Noble Alloy Porcelain-Fused-to-Metal Crowns in the Esthetic Area: A Retrospective Cohort Study. Journal of Prosthodontics. 2016;25(7).

Gonzalez-Bonilla M, Berrendero S, Moron-Conejo B, Martinez-Rus F, Salido M. Clinical evaluation of posterior zirconia-based and porcelain-fused-to-metal crowns with a vertical preparation technique: an up to 5-year retrospective cohort study. J Dent. 2024 Sep;148:104953.

Yoon TH, Chang WG. The fabrication of a CAD/CAM ceramic crown to fit an existing partial removable dental prosthesis: A clinical report. Journal of Prosthetic Dentistry. 2012;108(3).

Chandler HT, Brudvik JS, Fisher WT. Surveyed crowns. J Prosthet Dent. 1973 Nov;30(5):775–80.

Carracho JF, Razzoog ME. Removable partial denture abutments restored with all-ceramic surveyed crowns. Quintessence Int. 2006;37(4).

Khalifa A, Aggag M. FULL MOUTH REHABILITATION USING CAD-CAM SURVEYED ZIRCONIA CROWNS AND A REMOVABLE PARTIAL DENTURE (CASE REPORT). Alexandria Dental Journal. 2022 Oct 2;0(0):0–0.

Seals RR, Stratton RJ. Surveyed crowns: a key for integrating fixed and removable prosthodontics. Quintessence Dent Technol. 1987;11(1).

Rehmann P, Orbach K, Ferger P, Wöstmann B. Treatment Outcomes with Removable Partial Dentures: A Retrospective Analysis. Int J Prosthodont. 2013;26(2).

Rudd RW, Bange AA, Rudd KD, Montalvo R. Preparing teeth to receive a removable partial denture. J Prosthet Dent. 1999;82(5).

Paek J, Noh K, Pae A, Lee H, Kim HS. Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis. J Adv Prosthodont. 2016;8(4):329.

Gulzar RA, Sharma S. Aesthetic management of anterior teeth: A case series. Int J Dent Oral Sci. 2021;8(9).

Hajira Noorein. Effect of rest seat on the in vitro mechanical performance of monolithic zirconia crowns supporting bilateral free-end removable partial dental prostheses: a pilot study. University of Toronto; 2018.

Dunham D, Brudvik JS, Morris WJ, Plummer KD, Cameron SM. A clinical investigation of the fit of removable partial dental prosthesis clasp assemblies. Journal of Prosthetic Dentistry. 2006;95(4).

Kamposiora P, Papavasiliou G, Bayne SC, Felton DA. Stress concentration in all-ceramic posterior fixed partial dentures. Quintessence Int. 1996;27(10).

Plengsombut K, Brewer JD, Monaco EA, Davis EL. Effect of two connector designs on the fracture resistance of all-ceramic core materials for fixed dental prostheses. Journal of Prosthetic Dentistry. 2009;101(3).

Lan TH, Liu PH, Chou MMC, Lee HE. Fracture resistance of monolithic zirconia crowns with different occlusal thicknesses in implant prostheses. Journal of Prosthetic Dentistry. 2016;115(1).

Manchester JA, Chung KH, Brudvik JS, Ramos V, Chen YW. Fracture resistance of cingulum rest seats in CAD-CAM tooth-colored crowns for removable partial denture abutments. Journal of Prosthetic Dentistry. 2019;121(5).

Tanaka A, Miyake N, Hotta H, Takemoto S, Yoshinari M, Yamashita S. Change in the retentive force of Akers clasp for zirconia crown by repetitive insertion and removal test. J Prosthodont Res. 2019;63(4).




DOI: https://dx.doi.org/10.21622/AMPDR.2024.04.2.965

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Hagar Ibrahim, Marwan Aggag

Advances in Medical, Pharmaceutical and Dental Research
E-ISSN: 2812-4898
P-ISSN: 2812-488X 

Published by:

Academy Publishing Center (APC)
Arab Academy for Science, Technology and Maritime Transport (AASTMT)
Alexandria, Egypt
ampdr@aast.edu