Transformer Isolated Buck-Boost Converters
Abstract
Of the single-switch dc-to-dc converters, those with the buck-boost voltage transfer function offer most potential for transformer coupling, hence isolation, at the kilowatt level. This paper highlights the limitations of the traditional magnetic coupled, buck-boost topology. Then four split-capacitor transformer-coupled topologies (specifically the Cuk, sepic, zeta, and a new, converters) with a common ac equivalent circuit are explored, that do not temporarily store core magnetic energy as does the traditional isolated buck-boost converter nor have a core dc magnetizing current bias, as with the sepic and zeta transformer coupled topologies. Core dc bias capacitive voltage compensation is a practical design constraint in three of the four topologies, while all four must cater for stray and leakage inductance effects. Simulations and experimental results for the new converter at 408W support the transformer-coupled, single-switch dc-to-dc converter concepts investigated.
Keywords
Full Text:
PDFReferences
Z. Amjadi and S.S.Williamson. “Power-electronics-based solutions for plug-in hybrid electric vehicle energy storage and management systems.” Industrial Electronics, IEEE Transactions on, vol. 57, Issue 2, pp.608-616. 2010. DOI: 10.1109/TIE.2009.2032195
R. K. Singh and S. A. Mishra. “Magnetically coupled feedback-clamped optimal bidirectional battery charger.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 2, pp. 422-432, 2013.DOI: 10.1109/TIE.2012.2186776
S-J. Cheng, Y-K. Lo, H-J. Chiu and S-W. Kuo. “High-efficiency digital-controlled interleaved power converter for high-power PEM fuel-cell applications.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue2, pp. 773-780, 2013. DOI: 10.1109/TIE.2012.2206349
W. Li, L. Fan, Y. Zhao, X. He, D. Xu and B. Wu. “High-step-up and high-efficiency fuel-cell power-generation system with active-clamp flyback–forward converter.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 1, pp. 599-610, 2012. DOI: 10.1109/ TIE.2011.2130499
W. Li and X. He. “Review of nonisolated high-step-up DC/DC converters in photovoltaic grid-connected applications.” Industrial Electronics, IEEE Transactions on, vol. 58, Issue 4, pp. 1239-1250, 2011. DOI: 10.1109/TIE.2010.2049715
D. Velasco de la Fuente, C. L. T. Rodríguez, G. Garcerá, E. Figueres and R.O. Gonzalez. “Photovoltaic power system with battery backup with grid-connection and islanded operation capabilities.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 4, pp. 1571-1581, 2013. DOI: 10.1109/TIE.2012.2196011
H. Valderrama-Blavi, J. M. Bosque, F. Guinjoan, L. Marroyo and L. Martinez-Salamero. “Power adaptor device for domestic DC microgrids based on commercial MPPT inverters.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 3, p. 1191-1203, 2013. DOI: 10.1109/TIE.2012.2198038
Y-P. Hsieh, J-F. Chen, T-J. Liang and L-S. Yang. “Novel high step-up DC–DC converter for distributed generation system.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 4, pp. 1473-1482, 2013. DOI: 10.1109/TIE.2011.2107721
A.V. Stankovic, L. Nerone and P. Kulkarni. “Modified synchronous-buck converter for a dimmable HID electronic ballast.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 4, pp. 1815-1824, 2012 DOI: 10.1109/TIE.2011.2141094
A. Richelli, S. Comensoli and Z. M. Kovacs-Vajna. “A DC/DC boosting technique and power management for ultralow-voltage energy harvesting applications.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 6, pp. 2701-2708, 2012.
DOI: 10.1109/TIE.2011.2167890
J. P. R. Balestero, F. L. Tofoli,R. C. Fernandes, G. V. Torrico-Bascope, and F. J. M. de Seixas. “Power factor correction boost converter based on the three-state switching cell.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 3, pp 1565-1577, 2012. DOI: 10.1109/TIE.2011.2160136
J-Y. Lee, Y-S. Jeong and B-M, Han. “A two-stage isolated/bidirectional DC/DC converter with current ripple reduction technique.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 1, pp. 644-646, 2012. DOI: 10.1109/TIE.2011.2109343
L-S. Yang and T-J. Liang. “Analysis and implementation of a novel bidirectional DC–DC converter.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 1, pp. 422-434, 2012. DOI: 10.1109/TIE.2011.2134060
Z. Ouyang, G. Sen, O. C. Thomsen and M. A. E. Andersen. “Analysis and design of fully integrated planar magnetics for primary-parallel isolated boost converter.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 2, pp. 494-508, 2013. DOI: 10.1109/TIE.2012.2186777
T-J. Liang, J-H. Lee, S-M. Chen, J-F. Chen and L-S. Yang. “Novel isolated high-step-up DC–DC converter with voltage lift.” Industrial Electronics, IEEE Transactions on, vol. 60, Issue 4, pp. 1483-1491, 2013. DOI: 10.1109/TIE.2011.2177789
Y-. Hsieh, J-F. Chen, T-J. Liang and L-S. Yang. “Novel high step-up DC–DC converter with coupled-inductor and switched-capacitor techniques.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 2, pp. 998-1007, 2012. DOI: 10.1109/TIE.2011.2151828
J-J. Yun, H-J. Choe, Y-H. Hwang, Y-K Park, and B. Kang. “Improvement of power-conversion efficiency of a DC–DC boost converter using a passive snubber circuit.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 4, pp. 1808-1814, 2012. DOI: 10.1109/TIE.2011.2141095
E. Babaei, M. E. S. Mahmoodieh, and H. M. Mahery. “Operational modes and output-voltage-ripple analysis and design considerations of buck–boost DC-DC converters.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 1, pp. 381-391, 2012. DOI: 10.1109/TIE.2011.2134056
N. Kondrath, and M. K. Kazimierczuk. “Comparison of wide- and high-frequency duty-ratio-to-inductor-current transfer functions of DC–DC PWM buck converter in CCM.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 1, pp. 641-643, 2012 DOI: 10.1109/TIE.2011.2134053
M. Veerachary, and A. R. Saxena. “Design of robust digital stabilizing controller for fourth-order boost DC–DC converter: A quantitative feedback theory approach.” Industrial Electronics, IEEE Transactions on, vol. 59, Issue 2, pp. 952-963, 2012. DOI: 10.1109/TIE.2011.2158040
M. Qin, and J. Xu. “Improved pulse regulation control technique for switching DC-DC converters operating in DCM.” Industrial Electronics, IEEE Transactions on, vol.: 60, Issue 5, pp. 1819-1830, 2012. DOI: 10.1109/TIE.2012.2191750
C. Restrepo, J. Calvente, A. Romero, E. Vidal-Idiarte, and R. Giral. “Current-mode control of a coupled-inductor buck–boost DC–DC switching converter.” IEEE Transactions on Power Electronics, vol. 27, Issue 5, pp. 2536-2549, 2012. DOI: 10.1109/TPEL. 2011.2172226
R. Tymerski, and V. Vorperian. “Generation and classification of PWM DC-to-DC converters.” IEEE Transactions on Aerospace and Electronic Systems, vol. 24, no. 6, pp. 743-754, 1988.
DOI: 10.1109/7.18641
K-H. Liu, and F. C. Lee. “Topological constraints on basic PWM converters.” IEEE, PESC ‘88, vol. 1, pp. 164-172, 1988.
A. Elasser, and D. A. Torrey. “Soft switching active snubbers for dc/dc converters.” IEEE Transactions on Power Electronics, vol. 11, Issue 5, pp. 710-722, 1996. DOI: 10.1109/63.535403
V. Grigore. “Topological issues in single-phase power factor correction.” Institute of Intelligent Power Electronics Publications, Helsinki University of Technology, p. 114, 2001.
DOI: https://dx.doi.org/10.21622/resd.2016.02.2.112
Refbacks
- There are currently no refbacks.
Copyright (c) 2016 Barry W. Williams
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Renewable Energy and Sustainable Development
E-ISSN: 2356-8569
P-ISSN: 2356-8518
Published by:
Academy Publishing Center (APC)
Arab Academy for Science, Technology and Maritime Transport (AASTMT)
Alexandria, Egypt