A Brief Introduction to Building Information Modeling (BIM) and its interoperability with TRNSYS

Abdelaziz Naamane, AbdelAziz Boukara

Abstract


Abstract:

Hand-drafted print, sketching and hand modeling were the standard  for building designs before the advent of computer aided design (CAD) systems . Nowadays CAD systems are better understood, their adoption increased until the 2D, 3D CAD system  and the virtual reality became the norm. Their natural evolution has given rise to a new and more complex generation of building design tools known as building information modeling, or BIM. There is insufficient clarity about what BIM is, although this is improving, and there is much shared understanding. There is agreement that BIM is not just software. BIM is not just CAD, or geometric data. BIM is a collaboratively generated and maintained, data rich, information source for the life of the design process and beyond. In this paper , we present briefly the greatest value derived from BIM in the use and maintenance of buildings and the use of TRNSYS with BIM.


Keywords


Building Information Modeling,Energy, modeling

Full Text:

PDF

References


Klein, S. A., Beckman, W., Mitchell, J. W., Duffie, A. J., Duffie, N. A., Freeman, T. L., Mitchell, J. C., Braun, J. E., Evans, B. L., Kummer, J. P., Urban, R. E., Fiksel, A., Thornton, J., Blair, N. J.,Williams, P. M., Bradley, D. E., McDoweel, T. P. & Kummert, M. 2004. TRNSYS 160- A TRaNsient SYstem Simulation program, User Manual, Madison, Solar Energy Laboratory, University of Wisconsin-Madison.

Laine, T., et al., 2010. Energy and Thermal Performance Management Through Utilisation of Building Information Models NBDM, Neutral Building Data Model, http://nbdm.org/

Nytsch-Geusen, C. et al., 2003. Integration of CAAD, Thermal Building Simulation and CFD by using IFC Data Exchange Format, Eigth International IBPSA Conference, Eindhoven, Netherland.

Bazjanac, V. 2008. IFC BIM-based methodology for semi-automated building energy performance simulation. In L. Rischmoller (ed.), CIB W78, Proc. 25th conf.

Ford, S., Aouad, G., Kirkham, J., Brandon, P., Brown, F., Child, T., Cooper, G., Oxman, R., Young, B., 1995. An information engineering approach to modelling building design, Automation in Construction 4(1), pp. 5-15.

Sacks, R., Eastman, C.M., Lee, G., 2004. Parametric 3D modeling in building construction with examples from precast concrete, Automation in Construction 13(3), pp. 291-312.

Migilinskas, D., Ustinovichius, L., 2006. Computer-aided modelling, evaluation and management of construction project according PLM concept,Lecture Notes in Computer Science 4101, pp. 242-250.

Eastman, C., Teicholz, P., Sacks, R., Listo, K., 2008. BIM handbook: A guide to building information modeling for owners, managers, designers, engineers, and contractors. Hoboken (New Jersey): Wiley, p. 490.




DOI: http://dx.doi.org/10.21622/resd.2015.01.1.126

Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 Abdelaziz Naamane

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Renewable Energy and Sustainable Development

E-ISSN: 2356-8569

P-ISSN: 2356-8518

 

Published by:

Academy Publishing Center (APC)

Arab Academy for Science, Technology and Maritime Transport (AASTMT)

Alexandria, Egypt

resd@aast.edu