Aerodynamic Optimization of a Wind Turbine Blade Designed for Egypt's Saharan Environment Using a Genetic Algorithm

Khaled Yassin, Aya Diab, Zakaria Ghoneim

Abstract


This work aims to optimize the aerodynamic parameters (airfoil chord lengths and twist angles smoothed using Bezier curves) of the NREL 5MW wind turbine and a wind turbine designed for site-specific wind conditions to increase the wind turbine's annual energy production (AEP) under this site conditions. This optimization process is carried out using a Genetic Algorithm (GA) developed in MATLAB and coupled with NREL's FAST Modularization Framework. The results shows that after optimizing the NREL 5MW wind turbine design, the AEP was improved by 5.9% of the baseline design AEP while a site-specific designed wind turbine using Schmitz equations shows 1.2% improvement in AEP. These results shows that optimization of wind turbine blade aerodynamic parameters for site-specific wind conditions leads to improvement in AEP and hence decreasing cost of energy generated by wind turbines.

Keywords


Wind Turbine;aerodynamics;optimization;genetic algorithm;site-specific wind turbine

Full Text:

PDF

References


A. Maheri, S. Noroozi and J. Vinney, “Application of combined analytical/FEA coupled aero-structure simulation in design of wind turbine adaptive blades,” Renewable Energy, Volume 32, Issue 12, October 2007, Pages 2011-2018.

L. Xiong, C. Yan, and Y. Zhiquan. “Optimization model for rotor blades of horizontal axis wind turbines,” Frontiers of Mechanical Engineering in China: 483-488.

W. Xudong, Ch. Jin, and W. ZhongShen, W. Jun Zhu, and J. NørkærSørensen. “Shape optimization of wind turbine blades,” Wind Energy: 781-803.

M. Mohamed and K.Wetzel, “3D Woven Carbon/Glass Hybrid Spar Cap for Wind Turbine Rotor Blade, Trans,” of ASME, Journal of Solar Energy Engineering, 128 (2006) 562-573.

M. Hansen, “Aerodynamics of Wind Turbines,” 2nd ed. London: Earthscan, 2008.

N. Mortensen, J. Hansen, J. Badger, B. Jørgensen, C. Hasager, U. Paulsen, O. Hansen, K. Enevoldsen and L. Youssef. “Wind atlas for Egypt: measurements, micro- and mesoscale modelling,” European Wind Energy Conference EWEC 2006; 2006

J. Holland. “Adaptation in natural and articial systems,” Ann Arbor, MI: The University of Michigan Press; 1975.Ann Arbor, MI: The University of Michigan Press; 1975.

K. Deb. “Multi-objective optimization using evolutionary algorithms,” John Wiley and Sons Ltd.; 2001.

G. Soremekun, Z. Gürdal, R. Haftka and L. Watson. “Composite laminate design optimization by genetic algorithm with generalized elitist selection,” Computers & Structures, Volume 79, Issue 2, January 2001, Pages 131-143.

A. Diab, M. Alaa, A. Hossam El-Din, H. Salem, and Z. Ghoniem. “Performance Degradation of Wind Turbine Airfoils Dust Contamination: A Comparative Numerical Study,” ASME Turbo Expo. 2015 (2015).

R. Rooij, and W. Timmer. "Roughness Sensitivity Considerations for Thick Rotor Blade Airfoils." Journal of Solar Energy Engineering 125.4 (2003): 468. Web.

R. Gasch and J. Twele. “Wind Power Plants: Fundamentals, Design, Construction and Operation,” Berlin: Springer Berlin, 2011.

J. Jonkman and, M. Buhl. “FAST user’s guide,” Tech. Rep. Golden, Colorado:National Renewable Energy Laboratory; 2005.

J. Jonkman, S. Butterfield, W. Musial, and G. Scott “Definition of a 5- MW Reference Wind Turbine for Offshore System Development” (2009)

M. Buhl, "Wind Turbine Airfoil List." Wind Turbine Airfoil List. NWTC, 6 July 2012. Web. 02 May 2015.




DOI: http://dx.doi.org/10.21622/resd.2015.01.1.106

Refbacks

  • There are currently no refbacks.


Copyright (c) 2015 Khaled Yassin, Aya Diab, Zakaria Ghoneim

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Renewable Energy and Sustainable Development

E-ISSN: 2356-8569

P-ISSN: 2356-8518

 

Published by:

Academy Publishing Center (APC)

Arab Academy for Science, Technology and Maritime Transport (AASTMT)

Alexandria, Egypt

resd@aast.edu